Do you want to update the search of the ceiling in a space in your dwelling? See how I up-to-date our basement ceiling with a whitewashed knotty pine wood plank board. I will consider you via the Diy wood plank ceiling method step-by-step.
You can also incorporate equivalent character to other spots of your household by including a wood plank accent wall or wood plank wainscoting, a planked kitchen island design and style, or a plank headboard wall.
Many thanks to DAP for sponsoring this publish. All opinions are ours this publish may possibly consist of affiliate one-way links — see our total disclosure policy right here.
Diy Whitewashed Wood Plank Ceiling
This ceiling truly remodeled the search of this space in our dwelling. We appreciate how it turned out. We are contemplating of doing this in other rooms in our dwelling but right before we do that I desired to exam out how we preferred it in this space in the basement.
We had by now installed new flooring, so now that we have a new basement ceiling, we just have to do everything in among! #youmightbeaRemodelaholic
See the befores of our Jordan dwelling right here and all the tasks for this dwelling right here.
Dimensions of Task:
11′ x 14′ (154 square ft) ceiling with aspect drop down. This space is under the key ground of the dwelling in the basement.
Value and Supplies:
Area components retail outlet charges
- (4) containers 8′ lengthy Knotty Pine Wood V-Plank Boards Kits $fifty four.01/box
- 41 rows at 11′ – 6″
- About 500′ of boards (sixty three boards, three.5 box kits)
- Insert ten% extra boards for waist. Fifty percent a box labored terrific for me.
- (1) Gal. White Latex Paint $31
- (ten) ten oz. DAP DYNAGRIP Adhesive $4/ten oz.
- (1) box 1 1/4″ Pin Nails $ten/box
- Total Cost $261
Video clip Coming Shortly
Remain tuned for a online video tutorial of this basement ceiling update. Subscribe to our YouTube channel and click on the bell to convert on the notifications!
Whitewashing and Installation Ways
1. Whitewash Boards First.
This will save you a large amount of time and headache if you do this first. I had greater manage of the color when I took the time to whitewash the boards right before I installed them.
Dilute the paint of selection with drinking water. I used about 75% paint to twenty five% drinking water for this search. I did not want it to be far too white so I wiped it off, with a rag, suitable following implementing the paint with a brush. Permit that dry for a few of hrs then you can begin setting up.
Associated Reading: Use this color washing method to stain wood any color!
2. Clean up the Surface.
Wash the ceiling with a damp rag and some dish soap to remove any grime or dust. This will help the boards adhere to the ceiling when you glue them in position.
You are going to also want to remove the mild fixtures to reinstall following your plank ceiling is installed. We took this prospect to swap the flush-mount “boob lights” with can lights and we appreciate the variance! A lot more data about that coming in the online video.
Go through extra about setting up recessed can lights or see our picks for extra fashionable flush-mount fixtures right here.
three. Mark All the Ground Joists or Ceiling Rafters.
In my circumstance, I was in the basement underneath the key stage of the dwelling, so I found all the ground joists with a stud finder and chalked a line throughout the space to detect the center of every single ground joist with a chalk line, so I could nail the boards to the ground joists powering the drywall in the ceiling.
I have found and investigated other procedures to setting up boards on the ceiling, but I made the decision that just nailing and gluing to the ceiling was the very best alternative for me. Our completed ceiling height without the new boards was 7′-6″ and I did not want to make it far too much shorter with other procedures that I noticed.
See how other DIYers have installed a plank ceiling in the kitchen and in the attic, and a reclaimed wood plank ceiling in a bedroom.
4. Start off first row.
Start off on the longest wall in the again of the space, reverse of the doorway. I ran the boards the length of the space, perpendicular to the door. Slice the boards as you go with a miter noticed.
Oriented the boards so the the tongue of the boards have been experiencing the entry of the space. I desired to make absolutely sure that from the entry of the space you could not see into the gaps of the tongue and groove of the boards.
I used the DAP DYNAGRIP Adhesive to the again of the board
Then used the pin nailer to maintain it in position on the ceiling although the adhesive dries. I nailed in to the edge of the tongue at and angle, to disguise most of the nail heads. Mainly because I used a pin nailer most of the holes exactly where so little it did not even mater far too much that they exactly where exhibiting.
5. Offset the Finishes of the Boards
Offset the finishes of the boards at minimum 4″ from the previous row. You want to stay away from lining up the finishes on every single row as much as you can. This will give you a nicer staggered search.
6. Repeat the Procedure Right up until the Ceiling is Finished
Repeat setting up the tongue and groove planks until finally you have included the ceiling. The upcoming online video will involve how to evaluate and slice about the holes for your lights, so be absolutely sure to subscribe to our YouTube channel to see that!
For the past row of boards I ripped the boards to width with a desk noticed dependent on the remaining width I essential to finish it off. I slice off the tongue end of the board. You also have to remove fifty percent of the groove up against the ceiling in order to glue this piece in position.
The moment the past board is installed then you are performed. We remaining the ceiling with whitewashed flat sheen search and we appreciate it.
What do you believe? Permit us know in the opinions underneath if a whitewashed knotty pine board ceiling is one thing you would like in your household. Please share and pin for afterwards!