I located just one from Land of Nod and beloved it! 1 factor I did not really like was the rate. $199 for just one bin . . . ouch! J and I understood we could make it on our very own for way a lot less and we did. We ended up not able to discover options for just what we desired. It took us a 7 days or two to hammer out the options. In this article they are!
We made the toy bins from just one 4×8 – 3/4″ sheet of plywood. We utilized a separate one/4″ sheet that we previously had for the backing. The moment put jointly, the toy cubby actions 36″ x 14 3/4″ x 32″.
How to Establish a Diy Cubby Storage Toy Organizer
- 3/4″ Sheet of plywood
- one/4″ Sheet of plywood*
- 2 – 1½″ Pocket gap screws
- 1¼″ Pocket gap screws
- Wooden glue
- Sand paper
- 1¼“Brad nails
- Paint/Primer or Stain of choice
Whole content procuring record and cut diagrams are bundled in the PDF toy cubby storage options right here.
Move one: Lower Pieces & Drill Pocket Holes
Lower out the cubby items as indicated in in the toy organizer woodworking program, like the mitered edges. Drill pocket holes as indicated in the options.
Move 2: Assemble Person Cubbies
Working with pocket holes and wooden glue, assemble 3 cubby sections.
Move 3: Install Dividers
Evaluate and mark the divider places, then nail in put.
Move 4: Stack and Incorporate Backing
Stack the 3 cubby sections. Lower a sheet of plywood to the correct dimensions and screwed it onto the again. This will maintain each individual shelf in put. To be able to stack and unstack the cubbies, cut individual backing items for each individual cubby segment.
Move 5: Finishing the Cubby Storage Cabinets
I chose a paint coloration identified as Critical Gray by Sherwin Williams. We permit it dry right away and moved it into put the following working day.
More cubby storage you can construct: