Best Way To Deep Clean Window Tracks ⬙ Window Well Experts

Is the pleasant weather around the corner, and you have thought of opening the windows of your living room that have been closed for a long time, and you have no idea mold has made their house on the tracks?

You decided to open the windows to breathe in some fresh air but wait, the Moldy windows not only look disgusting but also the mold can affect your house environment and can make you and your kids sick. So what should be done? This guide will explain to you how to come out of this problem by mentioning step-by-step solutions.

Reasons for mold on window tracks

Before finding out the solution, it is important to know how this problem comes so that you can avoid it in the future. Mold normally occurs in damp or humid areas, so if you are living in a place full of dampness, you will meet such problems, and it grows when avoided for a long time. Normally you will find them on windows where they usually occur.

The two most common reasons for window molds are condensation and leaks. If there is any water leakage and you haven’t paid attention to it, the tracks of your windows will likely meet the mold. Hence, better act accordingly and get this issue fixed before it is too late. As far as condensation is concerned, you have to decrease the level of air moisture. But how? Let’s dig into the details.

• It is better to install double or triple-pane windows in your house because they are mold-resistant. The single-pane window won’t deal with the mold, and the situation will become worse.
• Ventilation is the ultimate solution. Hence, always keep the windows ventilated so that you never have to deal with such possibilities.
• Whenever you cook or wash, do not forget to open the extractor fans because they also help you out in this matter.
• If you have house plants, do not keep them near the windows because they release moisture.
• The dehumidifier is also good for getting rid of moisture. You can buy it from anywhere.
• If the outside temperature is normal and not too chilly, keep the windows open

How to clean mold from window tracks?

Let’s first talk about those items that must be in your house so that you can easily follow these steps without any disturbance.

• Baking Soda
• Bleach
• Water
• Gloves
• Mask
• White Vinegar
• Hydrogen Peroxide
• Spray Bottle
• Tea Tree Oil
• Mold Remover

It is better to get them all because you never know which step will work out for you. Now let’s check out the solutions.

Baking Soda is a Productive Solution

Baking soda is the best for cleaning dust or mold? There are a number of guides and helpful resources on clean window tracks but to professionally do it, You can use baking soda to remove mold as it is quite productive. Baking Soda has the power to release moisture from the atmosphere and it is what you need the most. Only some sprinkles of soda are enough to get rid of Mold from the Window tracks.

All you have to do is sprinkle it on the track and for better results, leave them overnight so that it shows its magic. You might have to go with this process 2 or 3 times until the mold is fully removed. It is better to wear a mask and gloves while removing the mold because it is unfavorable for your health. If this solution doesn’t work out, let’s follow the second one.

Use Bleach

We all agree that bleach is not a productive solution, but if baking soda is not showing its work, it is better to try this one. Moreover, people have been following this solution to remove mold for ages. Applying bleach wrongly or excessively can also provide damage to the wood, so be cautious. You should only follow this solution if the mold is too much and it requires heavy cleaning.

While applying bleach, ensure you have gloves, and a mask and the room is fully ventilated. Take 1 cup of bleach and add it to a gallon of water. It is better to pour this solution into a spray bottle so that it is easy to put in. Only 1 or 2 hours are enough to let this mixture sit on the molded side. If you are not willing to use bleach, move to the next part.

White Vinegar is Helpful

Vinegar adds taste to the food, but do you know white vinegar is great for dealing with mold? It is used for numerous cleaning purposes. How much vinegar you will keep depends on the amount of mold the window track has. Normally, 1 cup of vinegar diluted in 1 cup of water is enough. Put the solution in the spray bottle for quick cleaning.

Let the solution be there for two or three hours and once it is dry, wipe the moisture, and you will witness the magic. If the tracks are not thoroughly cleaned, repeat the process until you are satisfied.

Go for Hydrogen Peroxide

The best thing about hydrogen peroxide is that not only is it cost-effective, but also less harmful than bleach and other unfavorable products. Three or four percent of the solution is enough to remove the mold. Get this mixture in a bottle and wait for at least half an hour. If bubbles start appearing on the tracks, it is a sign of constructive outcomes.

Now take a damp cloth to remove the excessive moisture of the solution. You can also make a soapy water solution to clean the surface. Do not forget to repeat the process if the results are not up to the mark.

Use Tea Tree Oil

This oil has some anti-bacterial attributes, so you can never find anything better than this mold solution. Apart from letting you get rid of this mold issue, it will also make your windows fully tidy. Take 1 or 2 teaspoons of this oil and mix it in water and then add the solution to the spray bottle so that you can directly spray on the window tracks.

Now, wait for a few hours so that it shows its results. Once done, clear out the excess moisture from the surface with any damp cloth. If there is still the need for any mold removal, continue the process. It is indeed one of the most feasible solutions that you should adopt.

Buy a Mold Removal

Here is the last method that you would like to follow. What about buying a readymade solution instead of opting for a homemade solution? Various professional mold removers are in the stores, so you can purchase them according to your needs. Even if you call someone for mold removal, they use identical products.

For recommendation, you can go for CLR Mold and mildew removal make sure not a single particle of mold is left untreated and make the surface thoroughly clean. Another great alternative is HG Mold spray which removes all light and dark molds in less time. Ten minutes would be enough to keep this solution on track.

Steam Cleaner is the Best Alternative

Some people hesitate to use any kind of product or solution, so if you are also one of those, here is the answer. You never know which cleaning solution has harmful chemicals that could damage your windows hence steam cleaner would be the best alternative in this regard. Yes, it is expensive, but it is only a one-time investment after which you can enjoy maximum benefits. Be sure you have purchased the right steam cleaner. 

A good steam cleaner contains numerous accessories, so it will be a bonus. It will also help you to clean other things as well. Follow the instructions in the manual. In a few cleaners, all you need to do is turn on the steamer and once everything is cleaned, switch it off. After the cleaning is done, remove the moisture from the windows using a cloth. 

Before buying these cleaners, keep some factors in mind and do proper research so that you get the right product. Moreover, never take the warranty feature for granted. 

If you want extra protection, you can select the Atrium Dome window well cover that fully protects the windows and does not let any grime or mold enter. You can install these covers from anyone that provides you the facility to customize covering. It is not only engaging but is also quite accommodating.

Final Thoughts

Are you fed up with mold and mildew in your house, and you have done every possible means to get rid of them but failed? If you have kids at home, it is a matter of concern because they can cause a lot of damage. I have given a few best solutions above that will help you fight this deadly disease in the least amount of time. Moreover, the precautions are also mentioned that will aid you in avoiding this problem. 

If you do not have enough time to make a homemade solution or can’t wait for many hours to get the results, simply buy the solution from the stores that will save your time. Moreover, investing in the steam cleaner will also show great results.